Customization: | Available |
---|---|
Output Type: | Single |
Warranty: | >2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Input Voltage | 90 ~ 264Vac |
Input Frequency | 47 ~ 63Hz |
Input Current | 1.2A/115Vac 1A/230Vac |
Inrush Current | 30A/115Vac 60A/230Vac, cold start |
Leakage Current | 0.25mA / 240Vac |
Line Regulation | ±1.0% |
Set Up, Rise Time | 500ms, 20ms / 230Vac 500ms, 20ms / 115Vac at full load (for 5~36V) |
500ms, 30ms / 230VAC 500ms, 30ms / 115VAC at full load(for 48V) | |
Hold Up Time | 50ms/230Vac 16ms/115Vac at full load |
Over Current Protection | 110 ~ 150% rated output power |
Hiccup mode, recovers automatically after fault condition is removed | |
Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
Working Temperature | -30°C ~ +70°C (Refer to output load derating curve) |
Working Humidity | 20 ~ 90% RH non-condensing |
Storage Temperature, Humidity | -40°C ~ +80°C, 10 ~ 95% RH |
Temperature Coefficient | ±0.03%/°C (0 ~ 50°C) |
Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes |
Withstand Voltage | I/P-O/P:3KVAC |
Isolation Resistance | I/P-O/P:>100M Ohms/500VDC 25°C 70%RH |
Safety Standards | UL1310 Class 2, CAN/CSA C22.2 No. 223-M91(except for 5V,48V), IP67 approved, |
Design refers to TUV EN60950-1, EN61347-2-13 | |
EMC | Compliance to EN55022 (CISPR22) Class B; EN61000-3-2,-3; |
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A | |
MTBF | 732Khrs min. MIL-HDBK-217F (25°C) |